VK000960GWTHB HPE 960GB TLC SATA 6GBPS Read Intensive 2.5-inch

VK000960GWTHB Specifications

HPE VK000960GWTHB 960 GB 2.5″ SATA 6 Gb/s Read-Intensive Solid State Drive

KEY FEATURES

• Storage Capacity: 960 GB

• Interface Type: SATA 6 Gb/s

• Form Factor: 2.5″ Small Form Factor (SFF)

• Flash Type: Triple-Level Cell (TLC) NAND

• Drive Type: Internal Solid State Drive

• Target Use: Enterprise read-intensive workloads in HPE ProLiant Gen9 and Gen10 servers

PERFORMANCE

• Sequential Read Speed: Up to 530 MB/s

• Sequential Write Speed: Up to 480 MB/s

• Random Read IOPS (4KiB, Q=16): Up to 58,500

• Random Write IOPS (4KiB, Q=16): Up to 36,500

• Maximum Random Read IOPS (4KiB, Q=32): Up to 58,500

• Maximum Random Write IOPS (4KiB, Q=16): Up to 38,200

• Average Random Read Latency (4KiB, Q=1): ~120 µs

• Average Random Write Latency (4KiB, Q=1): ~65 µs

• Drive Transfer Rate (External): 600 MB/s

PHYSICAL

• Form Factor: 2.5″ Small Form Factor (SFF)

• Height: 0.3 inches (7.6 mm)

• Width: 2.75 inches (69.85 mm)

• Depth: 3.94 inches (100.1 mm)

• Weight: Approximately 0.5 lbs (227 g)

• Interface Connector: 7-pin Serial ATA

RELIABILITY & ENVIRONMENTAL

• Drive Writes Per Day (DWPD): 1.0

• Endurance: 1,710 TBW

• Operating Temperature Range: 0 °C to 70 °C

• Non-Operating Temperature Range: –40 °C to 85 °C

• Operating Shock Resistance: 30 Gs

• Non-Operating Shock Resistance: 1500 Gs

• Operating Vibration: 2.17 Gs (7–800 Hz)

• Non-Operating Vibration: 3.13 Gs (7–800 Hz)

ADDITIONAL FEATURES

• Hot-Swap Capable: Yes

• Digitally Signed Firmware: Yes

• Carrier Type: HPE Smart Carrier (SC)

• Compatibility: HPE ProLiant Gen9 and Gen10 servers

• Power Consumption:

  • Idle: 0.78 W

  • Random Read: 1.61 W

  • Random Write: 1.61 W

  • Sequential Read: 1.69 W

  • Sequential Write: 2.35 W

  • Maximum: 2.43 W