HX436C17FB3AK2/16 HyperX FURY RGB DDR4 16GB

HX436C17FB3AK2/16 Specifications

HyperX Fury RGB 16 GB DDR4‑3600 DIMM Kit (2 × 8 GB)

Manufacturer: Kingston / HyperX
Manufacturer Model: HX436C17FB3AK2/16
Product Line: HyperX Fury RGB
Product Series: DDR4 3600 MHz DIMM Kit
Product Type: Internal Memory Module (RAM)
Product Name: HyperX Fury 16 GB (2×8 GB) DDR4‑3600 288‑Pin DIMM Kit

KEY FEATURES:
Memory Capacity: 16 GB (2 × 8 GB)
Memory Type: DDR4 SDRAM
Interface Type / Speed: DDR4‑3600 MHz (PC4‑28800)
Form Factor: 288‑pin DIMM
Module Type: Unbuffered, Non‑ECC (UDIMM)
Voltage: 1.35 V (XMP 3600 MHz) / 1.2 V (JEDEC baseline)
Module Configuration: Each module is 1Rx8 (single‑rank), built on eight 1G × 8‑bit FBGA chips per module
Heat Spreader / Cooling: Yes — low‑profile heatsink (RGB heat spreader)
Supported Features: On‑Die Termination (ODT), 8-bit pre‑fetch, Burst-length switchable (BL8 or BC4), gold contact fingers, full DDR4 mechanical/electrical compliance, Intel XMP 2.0 profile support, RGB lighting

PERFORMANCE:
Default (JEDEC) Timing: DDR4‑2400, CL17‑17‑17 @ 1.2 V
XMP Profile #1: DDR4‑3600, CL17‑21‑21 @ 1.35 V
Alternate Profile: DDR4‑3000, CL15‑17‑17 @ 1.35 V
CAS Latency (at rated 3600 MHz): CL17
Row Cycle Time (tRCmin): 45.75 ns (minimum)
Row Active Time (tRASmin): 32 ns (minimum)
Refresh-to-Active / Refresh Command Time (tRFCmin): 350 ns (minimum)

ENVIRONMENTAL & RELIABILITY:
Operating Temperature Range: 0 °C to +70 °C
Storage Temperature Range: –40 °C to +85 °C
Error Checking: Non‑ECC (no error correction)

PHYSICAL:
Form Factor: 288‑pin DIMM
Module Dimensions (with heat‑spreader): Length 133.35 mm × Height 41.24 mm × Thickness ~7–8 mm (heatsink included)
Number of Modules: Kit of 2 (2 × 8 GB)